5.3 Aligning the corner knife station as to the seams
Caution: Danger of injury !
Switch off the main switch.
Adjust the corner knife station only w ith the sewing unit switched off.
Standard checking
The corner incisions must be symmetrical to the seams.
–
Adjust the maximum sewing length at the control.
–
Iron a piece of Vlieseline
â
onto the workpiece.
By this the corner incisions become better visible.
–
Sew a test seam.
–
Check seam and cutting pattern.
Correction of the corner incision at the seam end
–
Swing the corner knife station 1 out completely.
70
1
To Next Page
Loading...
Need help?
General
