Working basis
Service instructions 967 - 00.0 - 12/2014
15
3.3.8 Removing and installing the throat plate
Figure 8: Removing and installing the throat plate
Removing the throat plate
1. Remove the hook compartment cover ( page 14).
2. Use the hand lever to raise the foot.
3. Loosen the screws (2).
4. Remove the throat plate (1).
WARNING
Risk of injury
Risk of crushing injuries and stab wounds from moving and
sharp parts.
Switch the sewing machine off before you remove or install the
throat plate.
(1) - Throat plate (2) - Screws
ཱ
To Next Page
Loading...
