About these service instructions
4
Service instructions 967 - 00.0 - 12/2014
Information
Additional information, e.g. on alternative operating facilities.
Sequence
Specifies the work to be performed before or after a setting.
References
Reference to another section in the manual.
Safety Important warnings for the machine operator are specially designated.
Since safety is of particular importance, hazard symbols, levels of danger
and their signal words are described separately in 2 Safety.
Orientation If the figure is unclear, indications of right or left are always from the oper-
ator's point of view.
1.3 Other documents
This equipment includes components from other manufacturers. Each
manufacturer has performed a hazard assessment for these purchased
parts and confirmed their design compliance with applicable European
and national regulations. The proper use of these components is
described in each manufacturer's manual.
1.4 Liability
All information in this service instructions was compiled with consideration
to the state of the art, and applicable standards and regulations.
The manufacturer cannot be held liable for damages resulting from:
• Breakage and transport damages
• Failure to observe operating manual
• Improper use
• Unauthorized modifications to the machine
• Use of untrained personnel
• Use of unapproved replacement parts
To Next Page
Loading...
Need help?
General
