DURKOPP ADLER M-TYPE 867 - Threading Needle Thread (With Short Thread Cutter)

Setting the feed-dog
Service Manual 867 Version 02.0 - 04/2015 35
8.1.1 Moving the feed-dog
Cover
• Throat plate ( 3.3.6 Removing and installing the throat plate,
page 15)
Fig. 23: Moving the feed-dog on the feed-dog carrier
Setting steps
1. Loosen the screws (3).
2. Move the feed-dog (1) on the feed-dog carrier (2).
Place the removed throat plate next to it as an aid for orientation
so that the feed-dog can be screwed on straight.
3. Tighten the screws (3).
2
3
1
(1) - Feed-dog
(2) - Feed-dog carrier
(3) - Screws