Sewing feet
56 Service Manual 867 Version 02.0 - 04/2015
6. Unscrew the setscrew (3) far enough so that there is no longer any
contact with the clamp.
12.3 Setting presser foot pressure
The adjusting wheel at the top left of the machine arm determines the
pressure for the sewing feet on the material to be sewn. The pressure
can be adjusted continuously by turning the adjusting wheel.
The correct pressure depends on the material to be sewn:
• Lower pressure for soft materials, e.g. silk
• Higher pressure for harder materials, e.g. leather
Proper setting
The material being sewn does not slip and is correctly transported.
Fig. 44: Setting presser foot pressure
Setting steps
1. Turn the adjusting wheel for the sewing foot pressure (1):
• Clockwise: more pressure
• Counter-clockwise: less pressure
1
(1) - Adjusting wheel for the sewing foot pressure
To Next Page
Loading...
