MimioVote
for the first time will take approximately six hours; when fully discharged, recharging
the battery will take approximately twelve hours.
To set up MimioVote
1. Pull the plastic strip from each MimioVote unit to activate the rechargeable battery.
2. Insert each MimioVote unit into a slot on the MimioVote station.
3. Plug the power cord into the power connector on the back of the MimioVote station.
4. Plug the other end of the power cord into a power outlet.
5. Plug the MimioHub into an available USB port on your computer.
98
To Next Page
Loading...