MimioTeach
3. Click the MimioTeach Mouse anywhere on the whiteboard.
Interactive mode starts and the calibration screen appears.
To exit Interactive mode
Do one of the following:
l
Press the Interactive button, , twice on the MimioTeach bar.
l
Start MimioStudio Tools, click Interactive , and then click Exit.
l Start MimioStudio Settings, select Interactive, and then click Disable.
See Customizing MimioStudio for information on how to access MimioStudio
Settings.
Calibrating Interactive Mode
Each time Interactive mode is enabled, you are prompted to calibrate using the MimioTeach
stylus.
When using a permanently installed whiteboard and projector, you do not need to
recalibrate Interactive mode after the first session. See Adjusting the Interactive Settings.
To calibrate Interactive mode
1. If the calibration screen does not appear when you start Interactive mode, do one of the
following:
l
Start MimioStudio Tools, click the Interactive button, , and then click
Recalibrate.
l
Press the Interactive button, , on your MimioTeach bar.
l Start MimioStudio Settings, select Interactive, and then click Calibrate.
2. Press the MimioTeach stylus down on the whiteboard at the center of each of the nine
calibration targets.
Make sure to hold the stylus perpendicular to the writing surface as you click.
The calibration target disappears and the next calibration target appears.
When the calibration screen disappears, Interactive mode is enabled.
Using MimioTeach
You can use the MimioTeach bar and stylus in MimioStudio Interactive mode to deliver
lessons and presentations. In MimioStudio Interactive mode, you control the movement of
the cursor on your screen with the MimioTeach stylus, much like you would with a mouse
at your computer.
You can also use the various presentation tools found in MimioStudio Tools to focus your
audience on a specific area of the screen by displaying only certain parts of the screen. And,
you can annotate the screen with the drawing tools available in MimioStudio Tools using
the Screen Annotation feature.
Using the MimioTeach Stylus
In Interactive mode, the MimioTeach stylus can be used to control your desktop and interact
with applications on your computer from your whiteboard.
36
To Next Page
Loading...