Caring for MimioCapture
3. Remove dirt and smudges with one of the cleaning solutions mentioned above.
Avoid using liquids on any exposed charging contacts. Do not allow liquid into
any openings on the equipment.
4. Reconnect the power cable and the connector bar.
Mounting MimioCapture to a Non-Magnetic Whiteboard
The MimioCapture tray attaches securely to any magnetic whiteboard. If you do not have a
magnetic whiteboard, you can mount the MimioCapture tray to your whiteboard using the
included metal plates.
To mount MimioCapture to a non-magnetic whiteboard
1. Place the metal plates against the back of the MimioCapture tray as shown.
Make sure that the recess on each plate is inserted into the recess on the back of the
MimioCapture tray.
2. Remove the paper backing from the adhesive strips to expose the adhesive.
3. Press the MimioCapture tray firmly along the bottom-left edge of the whiteboard as
shown.
81
To Next Page
Loading...