Caring for Mimio Interactive
Caring for Mimio Interactive
Review the following topics for information about cleaning, inserting the batteries, and
permanently mounting your Mimio Interactive.
n Cleaning Mimio Interactive
n Inserting the Batteries
n Mounting Mimio Interactive Permanently
Cleaning Mimio Interactive
Mimio Interactiveis designed to give you long and trouble-free service while requiring very
little maintenance.
You can easily clean your Mimio Interactive using the following items:
n Lint-free cloth.
n Isopropyl alcohol, diluted dishwashing detergent, or diluted glass cleaner.
If you use glass cleaner, make sure it does not contain ammonia.
To clean the Mimio Interactive bar and Mouse
1. If necessary, disconnect the USB cable from the Mimio Interactive bar.
2. Use the lint-free cloth to wipe the exterior of the Mimio Interactive bar and Mouse.
3. Remove dirt and smudges with one of the cleaning solutions mentioned above.
Avoid using liquids on any exposed charging contacts. Do not allow liquid into
any openings on the equipment.
4. Reconnect the USB cable.
Inserting the Batteries
Mimio Interactiveis powered using the included USB cable and power adapter. Optionally,
Mimio Interactive can be powered using four AA batteries.
To insert the batteries
1. Press down and slide off the battery compartment cover.
2. Insert four AA batteries into the battery compartment.
3. Replace the battery compartment cover.
Remove the batteries if the Mimio Interactive bar will not be used for a long period of
time.
Mounting Mimio Interactive Permanently
The Mimio Interactive bar attaches to any whiteboard using the suction cups on the back of
the bar. If the Mimio Interactive bar will be used for extended periods of time or will be
used repeatedly in any one location, you should mount the bar using the included brackets.
To mount Mimio Interactive permanently
1. Snap the mounting brackets over the suction cups on the back of the Mimio Interactive
bar.
69
To Next Page
Loading...