Dymo MimioClassroom - Sharing the Whiteboard Remotely; Setting up Mimiostudio with Netmeeting; Adjusting the Netmeeting Settings

Sharing the Whiteboard
Remotely
This chapter describes how to share a presentation displayed on a Mimio-enabled
whiteboard with Microsoft NetMeeting
®
. You can also share your desktop using various
other desktop sharing solutions such as Windows
®
Meeting Space.
Setting up MimioStudio with NetMeeting
MimioStudio is capable of automatically connecting your whiteboard to an open
NetMeeting session. MimioStudio and NetMeeting can be used together in both Interactive
and Recording modes.
To use NetMeeting interactively
1. Start the NetMeeting application.
Consult the Microsoft NetMeeting documentation if necessary.
2. Start MimioStudio in Interactive mode.
See Setting Up Interactive Mode.
3. Use the MimioTeach stylus or Mimio Interactive mouse to select tools and add content
directly onto the NetMeeting Whiteboard.
To use NetMeeting with MimioCapture or Mimio Capture Kit
1. Start the NetMeeting application and the NetMeeting Whiteboard.
Consult the Microsoft NetMeeting documentation if necessary.
2. Use the MimioCapture or Mimio Capture Kit pens and eraser on the Mimio-enabled
whiteboard.
Your content is shared on the NetMeeting Whiteboard.
Adjusting the NetMeeting Settings
The NetMeeting settings allow you to enable/disable Microsoft NetMeeting support and
adjust the device associated with the NetMeeting Whiteboard.
To access the NetMeeting Settings
1. Start MimioStudio Settings.
2.
Click NetMeeting.
To enable NetMeeting interaction
Select the Enable NetMeeting interaction check box.
To disable NetMeeting interaction
131
Chapter 11