Eaton EASY-E4 Series User Manual

11. Connection to other devices
11.2 Establishing an Ethernet connection
Search for devices dialog box
Figure 248: Saving the found device's IP profile
A message saying that the IP address of the easyE4 device has been created as a new
profile will appear.
Close the Search for devices dialog box.
The easyE4 device's IP address will be found under Interface.
If a connection has already been established to multiple easyE4 devices, there will be
more options available. In this case, select the IP address of the easyE4 device you
want under Interface.
Communication\Connection view
Figure 249: Selecting the easyE4 device's IP address
Click on the Online button to establish a connection between your PC and the
easyE4 device.
If the easyE4 device is protected with a password, a cor-
responding prompt will appear and ask you to enter the pass-
word before you can access the device.
534
easyE4 11/18 MN050009 EN www.eaton.com

Eaton EASY-E4 Series Specifications

General

Type	Programmable Relay
Digital Inputs	Up to 12
Digital Outputs	Up to 8
Display	LCD
Operating Temperature	-25°C to +55°C
Protection Degree	IP20
Storage Temperature	-40°C to +70°C
Supply Voltage	24 V DC, 100-240 V AC
Analog Inputs	4
Outputs	Relay, transistor
Programming	EASY-SOFT-PRO
Communication	Ethernet, Modbus, CANopen
Expansion	Expandable with additional modules
Relative Humidity	5% to 95% (non-condensing)
Standards	IEC/EN 61131-2, UL 508, CSA C22.2 No. 142