Eaton EASY-E4 Series User Manual

Appendix
A.2 Approvals and declarations
A.2 Approvals and declarations
The following specifications apply to all easyE4 devices.
Approvals and declarations
cUL Application for easyE4 approval submitted
CE easyE4 units comply with all applicable European Union (EU) Directives and
feature the CE marking.
NEMA easyE4 device complies with the applicable guidelines in North America
Marine approval (shipping clas-
sification)
Application for easyE4 approval submitted
Applied standards and directives
EMC (relevant for CE) 2004/108/EEC 2014/30/EU
IEC/EN
61000-6-2
Interference immunity for industrial environments
IEC/EN
61000-6-3
Security
IEC/EN
61010
Safety requirements for electrical equipment for measurement,
control and laboratory use
Product standards
EN 50178_x Electronic equipment for use in power installations
IEC/EN
61131-2
Programmable controllers: Equipment requirements and tests
Mechanical shock
resistance
IEC/EN
60068-2-27
15g /11ms
Vibration IEC/EN
60068-2-6
Displacement amplitude: 5–9 Hz: 3.5 mm; 9–60 Hz: 0.15 mm
Acceleration amplitude: 60–150 Hz: 2 g
Environmental tests IEC/EN
60068-2-30
easyE4 11/18 MN050009 EN www.eaton.com
583

Eaton EASY-E4 Series Specifications

General

Type	Programmable Relay
Digital Inputs	Up to 12
Digital Outputs	Up to 8
Display	LCD
Operating Temperature	-25°C to +55°C
Protection Degree	IP20
Storage Temperature	-40°C to +70°C
Supply Voltage	24 V DC, 100-240 V AC
Analog Inputs	4
Outputs	Relay, transistor
Programming	EASY-SOFT-PRO
Communication	Ethernet, Modbus, CANopen
Expansion	Expandable with additional modules
Relative Humidity	5% to 95% (non-condensing)
Standards	IEC/EN 61131-2, UL 508, CSA C22.2 No. 142