3. Commissioning
3.11 Set system parameters using a memory card - e4settings.ini
Display Language - Display Language
Used to set the device menu language, → Section "Switch languages", page 629
0 ENGLISH
1 DEUTSCH
2 FRANCAIS
3 ESPAŇOL
4 ITALIANO
5 NEDERLANDS
6 POLSKI
7 ČESKÝ
8 PORTUGUÊS
9 РУССКИЙ
10 TÜRKÇE
11 ROMÂNĀ
12 MAGYAR
13 SRPSKI
14 HRVATSKI
15 SLOVENŠČINA
Tab. 20: Display Lan-
guage
Brightness1, Brightness2 - Display brightness 1 and 2
The two brightness levels 1 and 2 can be set as multiples of 10, i.e. they can be edited
in increments of 10.
The value range is between 0 and 100 (%). An intermediate value is rounded up to the
next multiple of ten
Brightness1
Display brightness during operation on the device, see → Section "Display", page 621
Default value: 100
Brightness2
Brightness for sleep mode
Default value: 50
Value: 0 will cause the display to be switched off in sleep mode
148
easyE402/24 MN050009ENEaton.com
To Next Page
Loading...
