Eaton easyE4

6. Function blocks
6.1 Manufacturer function blocks
Example 6: Overnight switching
The time switch is set for one day, e.g. Mondays, for an on time of ON=22:00 and an
off time of OFF=6:00.
The HW time switch must be assigned the following parameters:
Fig. 135: Programming view Weekly timer parameters tab
See also
 → Section "HY - Year time switch (Hora Year)", page 254
 → Section "OT - Operating hours counter ", page 264
 → Section "RC - Real-time clock", page 269
 → Section "T - Timing relay", page 272
 → Section "WT - Weekly timer (WeekTable)", page 291
 → Section "YT - Year time switch (Year Table)", page 284
 → Section "AC - Astronomic clock ", page 295
easyE402/24 MN050009ENEaton.com
253