Eaton easyE4

6. Function blocks
6.1 Manufacturer function blocks
Starting a new log session
Logging is restarted by the following actions for both types of storage:
l
Actuating the Start again button in the online operating dialog Card Manager in
the data logger recordings area
while the easyE4 is in its STOP operating mode.
l
Actuating the Start again button on the web server
l
Inserting a new SD card without an existing folder
l
Actuating the Card => PC button in the online operating dialog Card Manager,
data logger recordings area, for downloading the current log file while easyE4 is
in its RUN operating mode.
l
Downloading the current log file in the web client Web client/Diagnostics/Data
logger while easyE4 is in its RUN operating mode
504
easyE402/24 MN050009ENEaton.com