Eaton easyE4 User Manual

6. Function blocks
6.3 UF - User function block
6.3.11 Deleting a user function block
The function can be used to remove user function blocks from easySoft 8. Please
note that you will only be able to delete user function blocks that are not being used
in the project and that are not open for editing. If there are no user function blocks
that can be deleted, the Menu bar/Delete user function blocks will not be available.
The following options are available for deleting a user function block:
The following applies to easySoft 7:
1.
Program/Delete user function blocks… menu option
2.
User function blocks folder in list of operands and function blocks/Delete user
function blocks… context menu option
3.
User function blocks folder in list of operands and function blocks <name>/De-
lete user function block… context menu option
The following applies to easySoft 8:
1.
Program/Delete user function blocks… menu option
2.
User function blocks folder in list of operands and function block-
s/Project/Delete user function blocks… context menu option
3.
User function blocks folder in list of operands and function block-
s/Project/<name>/Delete user function block… context menu option
4.
User function blocks folder in list of operands and function block-
s/Archive/Delete user function block… context menu option
5.
User function blocks folder in list of operands and function block-
s/Archive/<name>/Delete user function block... context menu option
The following dialog box will appear if you use one of the first two options:
Fig. 285: Delete user function blocks dialog box
You will get a list of all user function blocks that can be deleted, and can select any
individual user function blocks you want. Once you select a function block and click
easyE402/24 MN050009ENEaton.com
613

Eaton easyE4 Specifications

General

Brand	Eaton
Model	easyE4
Category	Relays
Language	English