6. Function blocks
6.3 UF - User function block
on the Delete button, the function block will be deleted. After this, the user function
block will no longer be part of easySoft 8 and will no longer be available in the list of
operands folder.
If you use the third option, the user function block you selected will be deleted and
removed from the list of operands and function blocks directly.
6.3.12 Comparing user function blocks
The "Compare user function blocks..." menu option will be enabled as soon as you
select a user function block. If the selected user function block is password-pro-
tected, you will have to enter the password.
Please note that you can only compare user function blocks
that use the same programming language.
You can select whether you want to compare the user function block with a user
function block registered in easySoft 8 or to one from a uf7 file (i.e., a user function
block that has been previously exported). Accordingly, the following dialog box will
appear:
Fig. 286: Location of user function block user for comparison dialog box
If you choose to compare the selected user function block with an existing user func-
tion block, a dialog box showing all available user function blocks with the same pro-
gramming language will appear.
Fig. 287: UF user function block
If you instead choose to compare the selected user function block with a previously
exported user function block, the "Import user function block" dialog box will appear
so that you can select a uf7 file.
614
easyE402/24 MN050009ENEaton.com
To Next Page
Loading...
Need help?
General