Eaton easyE4

8. How easyE4 works internally
8.3 Device information
8.3 Device information
Device information is provided in the
Information menu both for service purposes and in order to make it possible to
identify the device's performance characteristics.
Following data is displayed:
The submenu is only provided in English
ACTUAL CONFIG - Shows the device configuration
l
NET GROUP: The NET group number, on a single line, e.g., 00
l
NET-ID: The device's station number, on a single line, e.g., 00
l
MAC ADDRESS: (MAC address of the device), two display lines
e.g. 0022C712343E
l
DEVICE NAME: e.g.:EASYE4-12UC1 Assigned DNS device name for the ETHERNET
network → Chapter "8 System settings", page 619
l
IP-ADDRESS: xxx.xxx.xxx.xxx
l
SUBNET MASK: xxx.xxx.xxx.xxx
l
GATEWAY ADDRESS: xxx.xxx.xxx.xxx
l
DNS SERVER: xxx.xxx.xxx.xxx
l
WEB SERVER (Enabled / Disabled)
l
HTTP PORT
l
MODBUS TCP (Enabled / Disabled)
SYSTEM - Shows the firmware version
l
E4- : Part number
l
OS : 1.30 (Version)
l
B : 510 (build version)
l
CRC : 60268 (checksum)

easyE402/24 MN050009ENEaton.com
653