Edimax CAP1300 - Page 105

AP, Managed AP, Repeater & Client Bridge Modes
105
SNMP Trap
Community
Enter an SNMP Trap Community name for verification with
the SNMP manager for SNMP-TRAP requests.
SNMP Trap
Manager
Specify the IP address or sever name (2-128 alphanumeric
characters) of the SNMP manager.
HTTP
Internet browser HTTP protocol management interface
TELNET
Client terminal with telnet protocol management interface
SNMP
Simple Network Management Protocol. SNMPv1, v2 & v3 protocol supported.
SNMPv2 can be used with community based authentication. SNMPv3 uses
user-based security model (USM) architecture.
Press “Apply” to apply the configuration.