340
{mode} short Set the guard interval to short.
long Set the guard interval to long.
- <Default configuration>
short
- <Command mode>
Immediate Mode, Edit Mode
- <Compatible Products>
CAP1300
- <Examples>
# wlan 2.4g gi long
wlan {2.4g | 5g} mrate
Configure the multicast or broadcast rate.
<The syntax of the command>
wlan {media} mrate {rate}
- <Parameter>
{media} 2.4g Set the multicast / broadcast rate of 802.11g
5g Set the multicast / broadcast rate of 802.11a
{rate} Set one of the following rates.
(1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54, auto)
- <Default configuration>
auto
- <Command mode>
Immediate Mode, Edit Mode
- <Compatible Products>
CAP1300
- <Examples>
# wlan 5g mrate auto
wlan {2.4g | 5g} rtsthreshold
Set the RTS Threshold.
<The syntax of the command>
wlan {media} rtsthreshold (num)
- <Parameter>
{media} 2.4g Set the RTS threshold of 802.11g
5g Set the RTS threshold of 802.11a
(num) Set the threshold on the frame size you begin sending RTS / CTS. (1~2347)
- <Default configuration>
2347
- <Command mode>
Immediate Mode, Edit Mode
- <Compatible Products>
CAP1300