Edimax CAP1300 - Page 339

339
wlan {2.4g | 5g} fragmentthreshold
Set the fragment threshold.
<The syntax of the command>
wlan {media} fragmentthreshold (num)
- <Parameter>
{media} 2.4g Enable or disable the wlan of the 802.11g.
5g Enable or disable the wlan of the 802.11a.
(num) Set the threshold for the frame size of frame transmission to perform fragmentation.
(256~2346)
- <Default configuration>
2.4g: 2346
5g: 2346
- <Command mode>
Immediate Mode, Edit Mode
- <Compatible Products>
CAP1300
- <Examples>
# wlan 5g fragmentthreshold 2345
# wlan 2.4g fragmentthreshold 2344
wlan {2.4g | 5g} keepalive
Set the keepalive interval terminal.
<The syntax of the command>
wlan {media} keepalive (num)
- <Parameter>
{media} 2.4g Set the keepalive interval function of 802.11g terminal.
5g Set the keepalive interval function of 802.11a terminal.
(num) Set the interval between sending keepalive. (0~65535 seconds)
- <Default configuration>
60
- <Command mode>
Immediate Mode, Edit Mode
- <Compatible Products>
CAP1300
- <Examples>
# wlan 5g keepalive 120
wlan {2.4g | 5g} gi
Set the guard interval.
<The syntax of the command>
wlan {media} gi {mode}
- <Parameter>
{media} 2.4g Set the guard interval of 802.11g.
5g Set the guard interval of 802.11a.