Edimax CAP1300 - Page 338

338
wlan {2.4g | 5g} channel checktime
Set the channel check time.
<The syntax of the command>
wlan {media} channel checktime {period}
- <Parameter>
{media} 2.4g Set the channel check time on 802.11g.
5g Set the channel check time on 802.11a.
{period} half_hr Set the half hour time to check channel.
one_hr Set the one hour time to check channel.
two_hr Set the two hours time to check channel.
half_day Set the half day time to check channel.
one_day Set the one day time to check channel.
two_day Set the two days time to check channel.
- <Default configuration>
half hour
- <Command mode>
Immediate Mode, Edit Mode
- <Compatible Products>
CAP1300
- <Examples>
# wlan 5g channel checktime one_hr
wlan {2.4g | 5g} {disable | enable}
Set the radio to enable or disable the wlan.
<The syntax of the command>
wlan {media} {state}
- <Parameter>
{media} 2.4g Enable or disable the wlan of the 802.11g.
5g Enable or disable the wlan of the 802.11a.
{state} disable Disable the wlan.
enable Enable the wlan.
- <Default configuration>
2.4g: disable
5g: disable
- <Command mode>
Immediate Mode, Edit Mode
- <Compatible Products>
CAP1300
- <Examples>
# wlan 5g enable
# wlan 2.4g enable