TP-00347-01 55
Overview
Changes that can be made are:
• Host Name: In this box enter the name
you wish to use to address this library in the future. It
is recommended that you use a name that is relevant to its location and/or its purpose. The
Host Name may be up to 15 characters long.
Allowed characters are: [A-Z], [a-z], [0-9], hyphen [-] and period [.]
Disallowed characters are: hyphen [-] as the first character, blanks or consecutive hyphens
[-]
•
Domain Name: In this box is the domain in which th
e library is registered. It may be updated
by editing the name and submitting the changes. The Domain Name may be up to 39 chars
long.
Allowed characters are: [A-Z], [a-z], [0-9], hyphen [-] and period [.]
Disallowed characters are: hyphen [-] as the first character, blanks or consecutive hyphens
[-],
blanks or consecutive hyphens [-] as the first or last
character of a label (A period [.] is the delimiter of domain
name labels!)
The sum of characters of the Host Name and the Domain Name may not
exceed 54
(15+39) characters.
•IPv4:
• DHCP Address Enabled - Used to set the RMU to seek
an assigned IP address from the
network's DHCP server.
• Static Address - This field is only active with DHCP a
ddress off (unchecked), a static IP
address may be programmed in this field.
• Subnet Mask - Used to set the Network Mask, contact your Network administrat
or to
receive this setting address if required.
• Gateway address - Used to set the Gateway Address; contact your Network administrator
to receive thi
s address if required (used when an IP address does not match any other
routes in the routing table)
• IPv4 DNS Server 1 - This is the IP address of your name server (DNS server). A DNS server
allow
s the library to communicate with other network clients via their host name. If you
have a DNS Server on your network, enter the IP address in this field.
• IPv4 DNS Server 2 - This is the alternate IP address of your name server (DNS server). A DNS
serve
r allows the library to communicate with other network clients via their host name.
If you have a DNS server on your network, enter the alternate IP address in this field.
•IPv6:
• IPv6 DNS Server 1 - This is the IP address of your name server (DNS server). A DNS server
allow
s the library to communicate with other network clients via their host name. If you
have a DNS Server on your network, enter the IP address in this field.
• IPv6 DNS Server - This is the alternate IP address of your name server (DNS server). A DNS
se
rver allows the library to communicate with other network clients via their host name.
If you have a DNS server on your network, enter the alternate IP address in this field.
• Stateless Auto Configuration
• DHCPv6 Addressing - Used to enable DHCP addressing assignment from the network
name
server
• Static Addressing - Used to enable a static IP address for the
RMU access
• Static Address - Setting of the static IP address for the RMU
•
Enable SSL for Web
To Next Page
Loading...