M588-00-880 Issue E
Page 114 © Edwards Limited 2015. All rights reserved.
Edwards and the Edwards logo are trademarks of Edwards Limited.
Appendix A2
UNITS (units to display)
Scroll by pressing UP/DOWN keys. Press ENTER to open a sub menu or CANCEL to exit back to the Display attributes
menu.
In each option scroll through the units available by pressing UP/DOWN keys. Press ENTER to select the displayed units
or CANCEL to exit back to the Units menu.
SELECT LINE (Normal display selection menu)
Scroll by pressing UP/DOWN keys. Press ENTER to open a sub menu or CANCEL to exit back to the Display attributes
menu.
In each option the select parameter menu is opened, scroll through the parameters by pressing UP/DOWN keys. Press
ENTER to select the parameter for display or CANCEL to exit back to the Select line menu.
A2.4.12 Set clock
Under the Setup menu. Press ENTER to change the date and time displayed or press CANCEL to exit back to the Setup
menu.
For each digit setting press the UP/DOWN keys to set the digit, press ENTER to accept and move to the next digit or
CANCEL to move back to the previous digit. Pressing ENTER at the end of the line will accept the new setting and
exit back to the Set Clock menu. Pressing CANCEL at the start of the line will cancel and exit back to the Setup menu.
Table A23 - Units
Parameter Key
Pressure... (PSI/kPa/mbar)
Temperature... (Centigrade/Farenheit/Kelvin)
Speed... (rpm/Hz)
Active Gauge... (mBar/Torr/kPA)
Table A24 - Selection menu
Parameter
Top Page 1…
Bottom Page 1…
Top Page 2…
Bottom Page 2…
To Next Page
Loading...
