Edwards GXS 160

M588-00-880 Issue E
Page 60 © Edwards Limited 2015. All rights reserved.
Edwards and the Edwards logo are trademarks of Edwards Limited.
This page has been intentionally left blank.
7.3 Ordering accessories
7.4 Spares
For information about all other spares, refer to the customer parts manual M588-40-845.
Table 26 - Accessories
Description Item Number
Exhaust check valve kit NW40 for GXS160 & 250 systems
Exhaust check valve kit NW50 for GXS450 & 750 systems
A50782000
A50790000
Water flow monitoring kit
*
*
Only suitable for GXS160 and GXS250 dry pumping systems.
A50783000
Nitrogen flow switches:
Suitable for 0 – 60 slm A50633000
Suitable for 0 – 204 slm A50634000
PDT D37280700
MCM MicroTIM
Connector kit for MCM MicroTIM
Virtual Display Terminal (VPDT)
D37360320
D37422802
D37488500
Accessory modules:
Active Accessory Module (AAM)
†
†
AAM includes a PAM. Note that the GXS AAM/PAM bracket kit is required to fit AAM/PAM to the pump.
D37480500
Passive Accessory Module (PAM)
†
D37480550
GXS AAM/PAM bracket kit
†
Contact Edwards
Adaptor cable 5 way XLR to 9 way D type, 2 m long D37370754
Profibus module kit D39753000
Pressure indicator assembly M58808141
GXS auxiliary gauge cable (0 - 10 V) D37241017
GXS pressure input cable (4 - 20 mA)
Connector kit for 4 - 20 mA cable
D37241019
D37241023
Inlet isolation valve (with position indicator) Contact Edwards
Inlet spool Contact Edwards
Inlet filter Contact Edwards
Inlet knock-out pot Contact Edwards
Exhaust knock-out pot Contact Edwards
Cleanable, drainable silencer Contact Edwards
Instrument pack (PT100 & ASG + cables) Contact Edwards
Table 27 - Spares
Spare Item Number
Drynert 25/6 lubricant:
1 kg (529 ml) H11312021
5 kg (2646 ml) H11312025