Edwards GXS 160

GXS Industrial Pump Numbering
GS 1 0 0000
Applications
G Industrial
Pump Mechanism
S Screw
Pumps / Boosters
2 = 160 (7.5 kW)
5 = 160 (7.5 kW) / 1750 (5.5 kW)
7 = 250 (7.5 kW)
A = 250 (7.5 kW) / 2600 (5.5 kW)
B = 250 (7.5 kW) / 2600 (7.5 kW)
D = 450 (11 kW)
F = 450 (11 kW) / 2600 (7.5 kW)
G = 450 (11 kW) / 4200 (7.5 kW)
L = 750 (22 kW)
N = 750 (22 kW) / 2600 (7.5 kW)
P = 750 (22 kW) / 4200 (7.5 kW)
Electrical
2 = Low volt 200-230 V 3Ø 50/60 Hz
5 = High volt 380-460 V 3Ø 50/60 Hz
Lubrication
1 = PFPE
Installation
0 = Side Exhaust and Skids
5 = Rear Exhaust and Castors
Pump purges
0 = Light duty (SSP + HVP)
1 = Light duty (SSP + HVP + EES)
3 = Medium duty (SSP + Inlet + GB + Exh PM + HVP)
4 = Medium duty + High Flow Purge / Solvent Flush
Cooling
0 = TMS Standard (GXS160 and GXS250)
2 = TMS+ (GXS450 and GXS750)
SSP = Shaft seal purge, Inlet = Inlet purge, GB = Gas ballast, Exh PM = Exhaust pressure monitor & purge, HVP = High Vacuum Gearbox Purge,
EES = External Evacuation System