9 STORAGE, TRANSPORTATION AND DISPOSAL
9.1 Storage of the SCU-1601
When planning not to use the SCU-1601 over a long period (more than a few months), follow the
precautions below:
1. Store the SCU-1601 in a horizontal position.
2. DO NOT store the SCU-1601 in the following areas:
• Areas of high humidity,
(if it must be stored in a place of high humidity, insulate it from the outside and use a
dehumidifying agent.)
• Areas prone to temperature extremes. High temperatures of more than 55 ºC (131 ºF), and
low temperatures of less than -25 ºC (-13 ºF).
• Areas which will be subjected to direct sunlight.
• Areas where corrosive gases may exist.
• Areas subjected to water/dampness.
• Areas subjected to excessive dust.
• Areas with insufficient ventilation.
• Areas subjected to strong magnetic and electric fields or radiation.
• Areas subjected to electric noise and vibration.
9.2 Transporting for repair or overhaul
WARNING
Ensure you follow the "Return Procedure" to prevent an accident during the
transportation, repair or overhaul.
Always contact Service office before returning the SCU-1601 for repairs, overhaul or other purposes.
When returning the SCU-1601 to Service office, use the original packing to prevent external damage.
If you do not have the original packing, use similar or superior packaging material.
"Return Procedure" and the "Malfunction Information" are in the end of the Instruction Manual. When
additional sheet is needed, contact Service office.
To Next Page
Loading...
