Edwards SCU-1601

SCU-1601 Control Unit for Turbomolecular Pump
MT-96E-1B1-0
Page 23
3
INSTALLATION
3.6.1 STP connection cable
Connect the receptacle (socket) side of the STP connection cable to the STP connector on the STP
pump and connect the plug (pin) side to "X1 P.CONNECTOR" and "X4 MOTOR" on the SCU-1601.
To "X1 P.CONNECTOR" and "X4 MOTOR"
on the SCU-1601
To the STP connector on the STP pump
29
φ20.6
105
68
φ32.5
99
105
100
φ54
97
φ54
SCU-1601 side
STP pump side
1
60 pin (pin)
2
8 pin (pin)
3
60 pin (socket)
4
60 pin (socket, L-Type connector)
Figure 16 - STP pump connection cable
1
4
3
2