Edwards SCU-1601

SCU-1601 Control Unit for Turbomolecular Pump
MT-96E-1B1-0
Page 25
3
INSTALLATION
3.6.3 STC-U remote cable
Connect the plug (socket) side of the STC-U remote cable to the "X3 STP" of the STC-U. Connect the
plug (pin) of the other side of the cable to the plug (socket) of the STC-U remote blanch cable.
To "X3 STP" of the STC-U
To STC-U remote blanch cable socket (9 pin) side
1.
9 pin (socket)
2.
9 pin (pin)
Figure 18 - STC-U remote cable
Note: The connector for the remote connection is fitted using M2.6 screws.
1
2