Edwards SCU-1601

SCU-1601 Control Unit for Turbomolecular Pump
MT-96E-1B1-0
Page 24
3
INSTALLATION
3.6.2 STC-U remote branch cable
onnect the plug (9 pin, socket) of the STC-U remote branch cable to the STC-U remote cable
connector (9 pin, pin). Connect the plug (37 pin, pin) of the other side of the cable to the “X7
REMOTE” of the STP control unit (SCU-1601).
Also, connect the plug (37-pin. socket) of the STC-U remote branch cable to the IO remote connector
on the customer device side.
Note: The screw size of the locking-nut for the remote connection connector is M2.6..
To STC-U remote cable connector (9 pin)
To "X7 REMOTE" of STP control unit
To IO remote cable connector on the customer device side
1
Locking nut
3
37 pin (socket)
2
9 pin (socket)
4
37 pin (pin)
Figure 17 - STC-U remote branch cable
2
4
T
P
ｺ
ﾝ
ﾄ
ﾛ
ｰ
ﾙ
ﾕ
ﾆ
ｯ
ﾄ
4
3
1