STP-iS2207 Series Turbomolecular Pump
MT-89E-001-C
Page 2
INTRODUCTION
1
Note: An alarm function is incorporated into this STP series. Alarm and cautionary messages are
displayed on the LCD of the display unit iDT-001 (optional accessory). Note that the words
"WARNING" and "CAUTION" displayed on the LCD indicate the need for overhaul of the
pump or precautions during the operation. They do not have the same meaning as the much
more serious symbols for "WARNING" and "CAUTION" used in the instruction manual.
1.2 Applied standards
The STP pump conforms to the following directives and standards:
1. Applied Directives
EC Machinery Directive
EC Electromagnetic Compatibility Directive
EC Low Voltage Directive
RoHS Directive *
* i.e. The product(s) contain less than - 0.1wt% for hexavalent chromium, lead, mercury, PBB and PBDE; 0.01wt% for
cadmium - in homogeneous materials (subject to the exemptions allowed by the Directive). This information relates only
to products sold on or after the date of this certificate. Edwards has taken all reasonable steps to confirm this statement,
which is based mainly on information from our suppliers. Whilst the RoHS Directive does not legally apply to this vacuum
equipment, we recognize that component compliance is relevant to many of our customers.
2. Applied Standards
EN12100
EN1012-2
EN61010-1
EN61326-1 (Class A)
EN61000-6-2
EN55011
EN50581
UL61010-1, 3
rd
Edition (Electrical Equipment for Measurement, Control, Laboratory Use)
SEMI S2-0715
To Next Page
Loading...
Need help?
General
