Edwards STP-iS2207 Series - Starting;Stopping the STP Pump; Pump Operation Method; Starting;Stopping the STP Pump (X2 REMOTE)

STP-iS2207 Series Turbomolecular Pump
MT-89E-001-C
Page 54
4
OPERATION
4.6.2 Starting/stopping the STP pump
There are the methods of contact input for the starting/stopping operation with the parallel port.
Starting the pump Stopping the pump
Short the circuit between (1)-(2). Open the circuit between (1)-(2).
Table 9 - Starting/stopping the STP pump (X2 REMOTE)
Stop Rotation Stop
(1)–(2)
X2 REMOTE
connector
OPEN
CLOSE
Pump operation
Figure 29 - Pump operation method