Edwards STP-iS2207 Series User Manual

STP-iS2207 Series Turbomolecular Pump
MT-89E-001-C
Page 60
4
OPERATION
4.9.2 Input operation port setting
Set the input operation port to the parallel port when operating the STP pump via the connector X2.
The default setting of the Input operation port is "I/O Remote" (parallel port). It can be set via serial
communication, the STP-Link or (optional accessory) or the display unit iDT-001 (optional accessory).

Edwards STP-iS2207 Series Specifications

General

Brand	Edwards
Model	STP-iS2207 Series
Category	Water Pump
Language	English