EFI Pro 24f - EFI Pro 24 F Control Window Asleep

Document ID: OMM-00148 Rev. B
54
4.3.12 EFI Pro 24f Control Window “Asleep”
When the printer is put into sleep mode, the EFI Pro 24f Control window becomes grayed-out. A moon icon appears in place
of the normal sun icon, and the window does not operate until placed back into the “awake” mode. This is accomplished by
clicking the moon icon to wake the system.
Figure 4-27: Control Window “Asleep”
1“Moon” icon
1