EFI Pro 24f - Re-Wake Printer

Document ID: OMM-00148 Rev. B
79
Note: When suspending print operations for the night or the weekend, perform daily maintenance procedures prior to
shutdown. See the EFI Pro 24f Maintenance Guide (at https://inkjet.support.efi.com/doc.php?doc=3753
) for daily
maintenance procedures.
Figure 9-1: EFI Pro 24f Control Screen Printer Mode (Asleep/Awake) Icon
9.1.1 Re-wake Printer
Use the following procedure to re-wake the printer after any shutdown:
1. Wake up printer
2. Raise carriage.
3. Manually purge all channels.
4. Wipe all heads with a clean section of dry lint free wipe.
5. Lower carriage.
6. Print a Nozzle check.
1“Moon” icon = Printer is Asleep 2“Sun” icon = Printer is Awake
2
1