A PQSCADA server running a prior version (not supporting the leakage voltage & current
PQZIP channels) that downloads leakage enabled PQZIP files will mark them as 'bad files'
and won't process them.
To apply your changes select
NOTE NOTE NOTE
If you are not logged on as the Administrator, you will not be able to change any of these
settings & you will receive the following error message in your attempt to do so:
Once you have signed on at the Administrator ensure that you select to
actually affect your changes.
SEE ALSO:
Principle of Operation
Default Settings
Enabling / Disabling PQZIP
FIFO
Fixed Quality vs. Fixed Ratio
File Capacity
FFT Mode
Capture DC
Erasing All PQZIP Data
To Next Page
