Emagic Logic fun - Mode-Buttons; Cycle (Repeat Mode)

100
Chapter 6
Transport Functions
Emagic
Logic fun
Mode-Buttons
The mode-buttons, unlike the transport buttons, do not trigger
any actions, but rather put Logic fun into a certain mode. Click-
ing on one of these activates it, and it remains activated until
you click on it again.
Cycle (Repeat Mode)
You can repeat a section of your song by using the cycle func-
tion (repeat mode). This is discussed in more detail in the
section: Cycle Mode, pp. 5–113 ff. xref
Metronome
This button allows you to turn the metronome on and off sepa-
rately for playback and record. The play or record status is
remembered when you activate the metronome.
1. Click briefly on the button to turn the metronome on or
off.
You can also access the recording and metronome settings
directly from the metronome button:
2. Click-hold on the metronome button.
A flip menu will open.
3. Select the option you want.
Setting the MIDI Metronome
You can select which note numbers and MIDI channels the
MIDI metronome will use.
Here’s how you set the MIDI Click:
Select Options > Settings > Metronome Settings, and activate
the option MIDI Click.
The MIDI Click window will open up.