General Appearance of the Score Edit Window
179
User Guide
Version 4.1
r
White Background
Switches between a white and yellow background.
Moving the Borders between the Different Areas
You can move the left and upper borders of the main working
area by positioning the cursor on one of those lines, and drag-
ging them. During these operations, the cursor becomes a tool
with two or four arrows. There are three possibilities:
•
On the left side you can alter the width of the column
containing the parameters, (thereby mainly changing the
appearance of the Partbox Groups), and the instrument
names.
•
Along the upper border you can create vertical headroom.
This is useful mainly when working on parts in linear view,
which contain very high notes or symbols above high notes,
that might not be visible otherwise, and therefore could not
be edited.
•
In the upper left corner of the main working area, you can
change the width of the parameter column, and the height of
the bar or page ruler.
Parameter Boxes
Both the Display Parameter Box and the Event Parameter Box
in the parameter column at the left side of the window can be
reduced to display only their title lines, by clicking on the trian-
gles at their upper left corners.
The Main Working Area
The appearance of the score display itself display depends on:
•
The settings of the Link and Catch buttons (see page 198).
•
Zoom level: There are 11 possible zoom levels. Please note:
These do not affect the printout, but only the screen display.
To Next Page
Loading...