Event List
61
User Guide
Version 4.1
r
•
When you are confident enough to record the solo, begin the
recording by clicking * on the numeric keypad, or by
pressing Record.
The count-in of one measure, starts, then the cycle zone will
play repeatedly and Logic fun will record. You can play your
solo now.
•
Let Logic fun continue running. After reaching the right
cycle point (measure 33), the SPL will jump back to the left
cycle point (measure 23). At measure 25, the recording
continues and you can record some more notes if you like.
Press the Stop button when you’re done.
Saving the Song
Here’s how to save the tutorial song, with your new solo:
•
Choose File> Save As…, and enter a new name for the song
to be saved as, for instance, “Tutsolo”. When using
Windows, Logic fun automatically assigns the extension “.
LSO”.
Load the initial tutorial song for further excercises.
4.5 Event List
In the event list, you can see all MIDI events of a sequence
displayed as an alphanumeric list.
•
Open the Event List for the sequence, “flute”, by double-
clicking with the right mouse button (Windows), or by
holding O down (Macintosh), on the sequence.
To Next Page
Loading...