Emagic Logic fun - 11.2 Event Editing; Adding Events; Duplicating Events

162
Chapter 11
The Event List
Emagic
Logic fun
1. If you click on an event while holding down the O (Mac)
or ç (Windows) key, you select all events between the
last event that was selected and the current one.
2. If you hold down the ç(Mac) or A (Windows) key and
select an event, all similar events will also be selected.
3. If you select an event while holding down the çO
(Mac) or A ç (Windows) keys, all identical events will be
selected.
The table shows what counts as similar or equal:
11.2 Event Editing
Adding Events
To add an event, click on the desired event type button with
the pencil (or with any other tool while holding down the right
mouse button (Windows) or the C key (Mac)). The event is
then added at the current song position, and is automatically
selected.
Duplicating Events
To duplicate an existing event (for example, so you can alter the
parameter value of the copy) click on the original event with
the pencil. An input box appears—this is where you enter the
position for the newly-duplicated event. If you just hit R, the
duplicate will appear at the same place as the original.
Object Similar Identical
Controller Event Controller# equal,
any data byte
Controller# and data
byte (control value)
equal
Note Event Note equal, any octave Note and octave equal