Emagic Logic fun - Recording; Setting Tracks to Record Audio; Recording Modes

142
Chapter 9
Working with Audio in the Arrange Window
Emagic
Logic fun
9.2 Recording
Setting Tracks to Record Audio
1. In the Arrange window:
Click on the round “Record Enable” button (R) in the track list
in the Arrange window. This shows the status of the REC
button on the audio track.
2. In the Mixer:
•
Open the mixer with the audio objects by selecting Win-
dows >Open Mixer.
•
Click on the REC button of the audio object you wish to
record to.
Audio will be recorded only on tracks that are armed, regardless
of which track the cursor happens to be on in the Arrange
window.
•
If a MIDI track is selected, MIDI will be recorded.
•
If an audio track is selected, audio will be recorded on the
track that is activated as Record Enabled (armed).
•
A MIDI track and up tp two audio tracks can be recorded
simultaneously by clicking on the MIDI track, and then the
audio track with the right mouse button (Windows), or while
pressing S (Mac).
If more tracks in the Arrange window are assigned the same
armed audio instrument (e.g., “Audio 1”), then the new audio
file (or audio region) is recorded to the selected track.
Recording Modes
Logic fun offers several ways to start audio recording at a partic-
ular song position.