Emagic Logic fun - Controller Numbers of the Mixer Controls

The MIDI Channel Strips
149
User Guide
Version 4.1
r
In the controller list, all controllers are listed by name, if the
MIDI standard provides a certain function for that controller
number. All controllers between 1 and 120 are accessible. Also
accessible: Some so-called “NRPN“ messages (Non Regis-
tered Parameter Numbers), with functions for certain synthe-
sizers as described by their name.
Controller Numbers of the Mixer Controls
These functions are always available:
Before a sound module can react to the events in the GM
Mixer, it must be configured to receive the relevant controllers
(see “Ctrl. no.” column). For details refer to the sound
module’s manual.
Sometimes a module’s response to controllers can be disabled
globally (e.g. MIDI-Menu, “Receive Control Change”. Switch
this to “Enable”).
These functions can be controlled in GS and XG synthesizers:
Name Symbol Description MIDI Event Ctrl.No.
Program Flip
menu
Sound in GM mod-
ules
Program
Change
–
Bank Value
box
Sound Bank selection depending on Bank
Select message
Volume Fader Volume Volume
7
Mute Button Volume:
Mute: button in
Fader: button out
Volume
0
Fader value
9
Pan Fader Stereo panning Pan
10
Name Description MIDI Event Ctrl.No.
Resonance Filter resonance (Q) Resonance
71
Cutoff Filter frequency (Fc) Cutoff
74
Attack Attack time of the envelope
generator
Attack Time
73
Note