Mixer Automation
157
User Guide
Version 4.1
r
Transport window, and then move any fader or knob on the
mixer, and automation data will be recorded. If the fader for the
piano channel on the mixer is moved, Logic fun automatically
creates a new sequence on the piano track in the Arrange
window. Move the volume fader for the drum loop, and a new
sequence is written to the corresponding track in the Arrange
window. During the recording process, it is possible to jump
back and forth between the mixer channels. The mixer assigns
automation data to the correct track automatically.
Mixer Automation:
•
Select Windows>Open Mixer in the main menu bar.
•
Click on “Record” in the Transport window.
Move the the faders, knobs, or buttons on the mixer.
To Next Page
Loading...