User Manual Chapter 11
GFK-1742F Jan 2020
Local Logic Tutorial 285
11.6.5 Windowing Strobes Program Example
The following example illustrates a method to use local logic to perform a windowing strobe
function. The example ignores the strobe command unless the current motor position is
inside the window (Actual Position > 4000 but less than 5000). If the motor position is inside
the aforementioned window, the first strobe occurrence causes the current motor position
to be captured within the strobe register. The application is shown pictorially in Figure 141.
Figure 141: Windowing Strobes Example
Windowing Strobes Local Logic Program
The motion program segment corresponding with the above local logic program is shown
below.
Windowing Strobes Example Motion Program Segment
To Next Page
Loading...
