User Manual Chapter 4
GFK-1742F Jan 2020
Configuration 107
4.3.6 Axis Configuration Data
The DSM314 Axis configuration parameters define items such as User Units to Counts ratio,
Jog Velocity, Jog Acceleration, End of Travel, and Velocity limits. The configuration
parameters for each control loop mode are defined and briefly described here. The numbers
in the “Ref” column refer to section reference numbers in this chapter. Values for
MaxPosnUu, MaxVelUu, and MaxAccUu in the following table can be calculated using the
formulas in Table 37 (“Computing Data Limit Variables”).
Table 33: Axis Configuration Data
To Next Page
Loading...
Need help?
General
