User Manual Appendix H
GFK-1742F Jan 2020
Using VersaPro with the DSM314 480
Figure 239: The Print Report Dialog Box
H-6 Creating a Local Logic Program
Both the Motion Editor and Local Logic Editor are accessed from VersaPro’s Folder Browser
window. However, once created and saved, motion programs and Local Logic programs
become part of the PLC CPU Hardware Configuration and are Stored to the PLC with the
other configuration information.
•
On the Main LD screen, click File on the Menu bar, then select New Motion. Then, on
the side menu, click Local Logic Program.
Figure 240: Creating a New Local Logic Program
To Next Page
Loading...
