User Manual Appendix H
GFK-1742F Jan 2020
Using VersaPro with the DSM314 485
If you are actively editing a local logic program and want to find out your approximate line
number, click the vertical scrollbar on the right side of the local logic editor. It displays the
line number of the line at the top of the window. If the cursor is several lines below the top
of the window, either scroll the window until the current line is at the top of the window or
count down the number of lines from the top and add them to the current line number.
Figure 246: LLExample Syntax Check Failure
Chapter 12 contains details and corrective actions for syntax errors and warnings.
H-6.2 Viewing the Local Logic Variable Table
The Local Logic Variable Table appears in the Information Window area of the screen and
contains information on the variables used in your Local Logic program. To use this feature,
a Local Logic block must exist. If none exist, create a new one. To display the table, click View
on the Menu bar, and select Local Logic Variable Table from the dropdown menu, shown in
the following figure:
To Next Page
Loading...
