User Manual Appendix H
GFK-1742F Jan 2020
Using VersaPro with the DSM314 471
H-3 Configuring the DSM314
The following information discusses configuring the DSM314. For configuring other
hardware, please refer to the VersaPro User’s Guide, GFK-1670, and the VersaPro on- line
help.
•
With the Configuration window open, as shown in the previous figure, double click
the empty slot where the DSM314 is to be installed. You will see a Module Catalog
window appear with a list of module categories:
Figure 227: Module Catalog Widow for Hardware Configuration
•
Click the Motion tab to access a list of motion module choices:
Figure 228: Motion Tab for Hardware Configuration
To Next Page
Loading...
