Specifications and Reference Data
231
Specifications and Reference Data
October 2018
Reference Manual
00809-0100-4026, Rev KC
Factory configuration
C1 Factory configuration (Configuration Data Sheet required with order, available at Emerson.com)
★
Alarm limit configuration
C4 NAMUR alarm and saturation levels, high alarm
★
C8
(11)
Low alarm (standard Rosemount alarm and saturation levels)
★
Overfill prevention
U1
(12)
WHG Overfill approval
★
Special certifications
Q4 Calibration Data Certificate
★
Q8
(13)
Material Traceability Certification per EN 10204 3.1
★
N2
(14)
Certificate of compliance with guidelines in NACE MR0175/ISO 15156 and NACE MR0103
QG GOST Primary Verification Certificate
Safety certifications
QS
(12)
Prior use certificate of FMEDA data
Positive material identification certificate
Q76 Positive Material Identification Certificate of Conformance
★
Shipboard approvals
(15)
SBS American Bureau of Shipping Type Approval
★
SDN Det Norske Veritas (DNV) Type Approval
★
SLL Lloyd's Register Type Approval
★
SBV Bureau Veritas Type Approval
★
Special procedures
P1 Hydrostatic testing
★
Antenna extension
S3
(16)
Cone antenna extension in 316/316L/EN 1.4404 SST. To be used if there are irregularities in the nozzle. Fits nozzles
up to 20 in. (500 mm).
Diagnostics functionality (see page 210)
DA1 HART Diagnostics Suite (includes Signal Quality Metrics diagnostics)
★
Table A-8. Rosemount 5402 Ordering Information
The starred options (
★
) represents the most common options and should be selected for best delivery.
The non-starred offerings are subject to additional delivery lead time.
To Next Page
Loading...
