Emerson Rosemount 5402 - Page 246

Specifications and Reference Data
October 2018
Reference Manual
00809-0100-4026, Rev KC
Specifications and Reference Data
232
Solids applications (see page 215)
SM1
(17)
Solids Measurement mode
★
Engineered solutions (see page 217)
Rxxxx Engineered Solutions beyond standard model codes (consult factory for details)
Typical model number: 5402 A H 1 E5 4S PV CA - M1 C1
1. Options E (eurofast) and M (minifast) are not available with explosion-proof, flameproof, or type n approvals.
2. Minimum temperature is -20 °C (-4 °F).
3. Not available with explosion-proof, flameproof, or type n approvals.
4. Requires FOUNDATION Fieldbus signal output (Ui parameter listed in “Product Certifications” on page 241).
5. G ½ in. SST cable gland is included in delivery.
6. Only available for solids applications.
7. Not available with hydrostatic testing (P1).
8. Requires Process Seal Antenna (2P-4P). O-rings are not wetted.
9. See “Pro
cess connections” on page 225 for Face style.
10. Only available for 4-in. cone antenna with process connection and material option; CA, CB, DA, EA, JA, JB, KA or LA.
11. The standard alarm setting is high.
12. Only available with 4-20 mA HART signal output.
13. Certificate includes all metallic pressure retaining wetted parts.
14. Requires protective plate cone antennas (2H-4H, 2M-4M, 2N-4N) or process seal antennas (2P-4P).
15. Only for stainless steel housing material (code S). Not available with Modbus signal output (code M). Contact an Emerson representative for additional information.
16. Requires a SST cone antenna (2S-4S).
17. Solids Measurement mode (SM1) is not available with HART Diagnostics Suite (DA1).
Table A-8. Rosemount 5402 Ordering Information
The starred options (
★
) represents the most common options and should be selected for best delivery.
The non-starred offerings are subject to additional delivery lead time.